| Item | Parameter |
| Panel Size | (1680-2650)*(992-1500)mm |
| Cycle time | 20S |
| Cutting Accuracy | ±1.5mm |
| Laying Accuracy | ±1.5mm |
| Overall dimensions:(L*W*H) | 6000*2320*2000 |
| Voltage | 3Phase 5 wire 380V,50Hz,AC±20% |
| Power | 5KW |
| Air Pressure | 0.5Mpa-0.7Mpa |
| Maximum Material Roll Diameter | ≤800mm |
2. Technical Performance of Auto EVA Layup Machine
1). Standard configuration hot melt, tailings will not fall off the machine.
2). Auto correction, auto detection of joints, auto throwing.
3). Hob cutting method, non-stick knife.
4). Auto hole punching, accurate hole punching.
5). Punching tools can be customized according to customer requirements (example: flat hole, original hole, oval hole).
3. Product Introduction of Auto EVA Layup Machine
Function description
The overall structure is composed of EVA, TPT It is composed of feeding and deviation correction mechanism, EVA hot melt welding mechanism (optional), punching mechanism (optional), cutting mechanism, glass straightening mechanism, pulling and laying mechanism, etc.
Servo bus control is adopted, with higher precision and stability
Equipped with EVA hot melt welding system, it can facilitate rapid refueling, reduce refueling time and improve production efficiency.
Technical performance of equipment
| Design beat | ≤ 25s / sheet_ |
| Cutting accuracy | EVA cutting length error + 2mm, TPT cutting length error + 1mm |
| Laying accuracy | Laying accuracy ≤ + 2mm |
| Refueling time | ≤ 5min |
| Switching time of different board types | One key switching |
| Operation mode | Manual + automatic |
| Noise requirement | ≤ 60dB_ |
| Man machine interface | Chinese and English mode |
